Titan RangeHigh speed, high power capacitor charger.
The Titan Power supply is designed for high speed, high power capacitor charging applications at voltages up to 120kV, 45kJ/sec and PRFs as high as 250Hz.
It uses a rugged IGBT based inverter running in resonant mode to achieve high efficiency and excellent ruggedness.
It is designed to run, either from a high DC voltage input (typically 550V), or from UK/EU3-phase input.
|Voltage source||550VDC or 415VAC three phase mains input|
|Output voltage||0 to 60kV | 0 to 120kV|
|Output current||1.65A maximum | 0 to 800mA|
|Polarity||Positive or negative|
|Repetition rate||250Hz maximum|
|Duty cycle||2 seconds on-load by 2 minutes off-load operation|
|Guard band protection||200us fixed after load discharged|
|HV connector||Proprietary connector|
|HV cable||Mating cable and connector supplied with PSU.|
|Cable length||3 metres detachable|
|Charge enable||Fibre optic input, active light on|
|Voltage program||Adjusted by 10 turn potentiometer with a DVM reading on front panel.|
|Voltage monitor||0 to 10V represents 0 to 60kV output through BNC connector|
|End of charge||Fibre optic output, active light on|
|Operation temperature||10 to 40°C|
|Storage temperature||-10 to 60°C|
|Height||9U | 11U|
|Depth||560mm (Handles excluded) | 780mm (Handles excluded)|
|Width||19” Rack | 605mm|
|Weight||70kg | 100kg|