Electron Beam Power Supply200kV

If you would like to learn more about this product: Please Contact Us

The Genvolt electron beam power supply range is suitable for 3D printing and additive manufacturing, laser metal deposition and electron beam welding. Consisting of high powered units, with power ranges available from 60kV up to 200kV. Both the DC filament and bias power supply are integrated within the mechanical build.

Current for the filament and bias voltages are measured at high potential, with the measurement sent via fibre optic connection to the control system.

Genvolt electron beam power supplies in corporate high power inverter technology as well as a patented rectification transformer with low stored energy and high reliability.

Input specifications

AC input voltage  Three Phase 360-440V, + neutral

 

Output specifications

High Voltage Power Supply  Power Supply Specification
Output voltage 60kV - 200
Output Power Options 3kW, 6kW, 10kW, 15kW, 20kW, 30kW and 40kW
Output Current 50mA, 100mA, 200mA, 300mA and 400mA
Stability of output current <0.2%
Output polarity Negative
Stability of Output Voltage <0.2%
RMS of high voltage Ripple <0.5%
Filament Power Supply  Filament Specification
Output Current DC 0A - 50A
Output Voltage 0V - 20V
Stability of Filament Current <0.5%
Bias Power Supply  Bias Specification
Output Current Max. 0.5mA
Output Voltage DC 0kV - 2kV
Stability of Output Voltage <0.2%
RMS of Output Voltage Ripple <0.5%

 

Protection

Circuit protection

The units can adopt either air or water cooling technologies and comes with complete in-built protection against over voltage, over current, over heat and discharge detection. This enables the unit to perform continuously over extended periods.

Control ports

User interface connector and rear panel connections

There are five sets of wiring terminals on the rear panel of the power supply, which are the ports for remote control of the power supply.

 

JD0 and JD1 are digital ports.

JA0 and JA1 are analogue ports.

JP1 is the supporting power supply providing 24V for external use. 

 

 

Environmental details

Operating temperature -10°C to 40°C
Relative humidity <90% non condensing

 

Mechanical details

Weight Dependant on Model
Dimensions Dependant on Model

 

 

Subscribe to our mailing list

Please enter your details below to register for our news and product updates.

* indicates required