Cygnus Range

140kV, DC-input workhorse PSU

Basic Specification The Cygnus series power supply is intended as a general purpose ‘workhorse’ source of high voltage. The electronics are compact and effi cient operating on dual 24V or 120VDC nominal with automatic sensing. It is available in 19” format if required with ripple specifi cation tailored to suit individual needs.
General Specification  
Input range 22 to 32 VDC or 110 to 140VDC with automatic sensing.
Output voltage As specifi ed up to a maximum of 160kV
Output power 0 to 800W.
Controls 0-5 volts control input: HV OK output unit enabled by active low signal.
Load regulation Typically 0.01% over 0 to 100% rated load.
Line regulation Typically 0.01% over 0 to 100% rated load.
 
Volts (KV) Current at Rated Voltage
1 800mA
5 160mA
10 80mA
20 40mA
50 16mA
80 10mA
100 8mA
160 5mA
  The above table is intended as an indication of system capability; intermediate voltages and special requirements may always be discussed with our technical staff.
If you don't have Adobe Acrobat you can DOWNLOAD ADOBE ACROBAT HERE.

Related Products