Cygnus - Bespoke Oil Pipeline X-ray Power Supply140kV, DC-input High Voltage Power Supply Unit

If you would like to learn more about this product: Please Contact Us

Genvolt have designed and manufactured a large variety of power supplies to meet a multitude of requirements. These power supplies were designed specifically for individual customers and whilst they are not available as 'off the shelf' products we are able to use these designs and others to create a tailor-made solution to your high voltage requirements.

The Cygnus series power supply is intended as a general purpose ‘workhorse’ source of high voltage. The electronics are compact and efficient operating on dual 24V or 120VDC nominal with automatic sensing. It is available in 19” format if required with ripple specification tailored to suit individual needs.

General Specification

Input range 22 to 32 VDC or 110 to 140VDC with automatic sensing.
Output voltage As specified up to a maximum of 160kV
Output power 0 to 800W.
Controls 0-5 volts control input. HV OK output. Unit enabled by active low signal.
Load regulation Typically 0.01% over 0 to 100% rated load.
Line regulation Typically 0.01% over 0 to 100% rated load.

Volts (KV) Current at Rated Voltage
1 800mA
5 160mA
10 80mA
20 40mA
50 16mA
80 10mA
100 8mA
160 5mA

The above table is intended as an indication of system capability; intermediate voltages and special requirements may always be discussed with our technical staff.

Subscribe to our mailing list

Please enter your details below to register for our news and product updates.

* indicates required