Industrial Radiography Oil Pipeline X-Ray Power SupplyCygnus Series
If you have an industrial radiography oil pipeline power supply requirement then the Cygnus series will be perfect for your needs. The Cygnus series x ray power supply has combined compact electronics and efficient operation parameters on either dual 24V or 120VDC, DC input, nominal with automatic sensing, it can be made available in 19" format, if required, with ripple specification tailored to suit individual needs and is a perfect addition to the users' non-destructive testing requirements.
The Cygnus series power supply is intended as a general purpose ‘workhorse’ source of high voltage, has a specified output voltage up to a maximum of 160kV and an output power range of 0 to 800W.
Our ndt oil pipeline x-ray power supply originates from the many years that we have been designing and manufacturing a comprehensive variety of power supplies to meet a multitude of ever demanding customer requirements. By working closely with our customers to determine their individual specific requirements and through extensive research and development we fabricated and developed the products they were after. A by-product of these designs is the Cygnus series power supply.
Despite the fact that these components derive from the development of high voltage power supplies designed specifically for individual customers, and whilst they are not available as 'off the shelf' products, we are able to use these designs and others to create a tailor-made solution to your high voltage requirements.
If you wanted a more specifically engineered x-ray power source, for harsh environments then the XR250 X-Ray Power Supply will suit your prerequisites.
|Input range||22 to 32 VDC or 110 to 140VDC with automatic sensing.|
|Output voltage||As specified up to a maximum of 160kV|
|Output power||0 to 800W.|
|Controls||0-5 volts control input. HV OK output. Unit enabled by active low signal.|
|Load regulation||Typically 0.01% over 0 to 100% rated load.|
|Line regulation||Typically 0.01% over 0 to 100% rated load.
The above table is intended as an indication of system capability; intermediate voltages and special requirements may always be discussed with our technical staff.