Electrospinning Machine

If you would like to learn more about this product: Please Contact Us

Genvolt Electrospinning Machine

After seeing the ever-increasing requirement for electrospinning machines and reliable electrospinning equipment, we have produced our very first unit, that is capable of nanofibre production, that's perfect as a starter kit or for use with more advanced applications.

What is Electrospinning?

Electrospinning is the process of producing fibers (normally Nanofibers) and particles by means of applying a voltage process (electrohydrodynamic phenomena) to a polymer solution by incorporating the use of a receptacle, a pump, a high voltage power supply and a collector.

Key Benefits of Syringe Pump:

  • Syringe purge mode.
  • Easy-to-use keypad interface.
  • Precise reproducible flow rates.
  • Remembers previous settings on power up.
  • Pumps continuously until you stop the pump.
  • Infusion rate can be changed while pumping.
  • Power failure mode allows pump to continue pumping after a reset.
  • Won't take up unnecessary space on your laboratory or production bench.
  • Syringe pumps are known for their capability in delivering a precise and smooth flow.

Create Nanofibres

Whether you're new to the concept of nanofiber production or need an upgrade to your current setup this will be the perfect kit for you. Utilising our versatile 7xx30 series laboratory power supply, and combining that with a digitally set infusion pump, our electrospinning machine gives the user a precise high voltage power supply and a syringe pump for easily controlled continuous production in an electrospinning environment. The perfect combination for producing electrospun nanofibers and other applications.

Electrospraying

Electrohydrodynamic spraying is more commonly known as electrospraying, a process of producing fine particles from a solution or liquid by applying high voltage. With the easily transportable power supply, setup time is minimal and the fine voltage adjustment allows for an accurate voltage to be applied to the polymer solutions being used to provide consistent results every time.

Description:

Capacity 1 Syringe from micro-litre size up to 60ml. (140ml partially filled)
Infusion Rate From 0.73 µL/hr (1 mL syringe) to 1500 mL/hr (60 mL syringe)
Volume Dispensed Displays total in mL or µL units
Selectable Infusion Rates Units in mL/hr, µL/hr, mL/min, µL/min
Footprint Size 5 3/4" x 8 3/4" (14.61cm x 20.32cm)

Mechanical and Electrical Functions:

Syringe Sizes Up to 140 cc
Number of Syringes 1
Motor Type Step motor
Motor Steps per Revolution 400
Mirco-stepping 1/8 to 1/2 depending on motor speed
Advance per step 0.2126 µm to 0.8504 µm depending on motor speed
Motor to Drive Screw Ratio 15/28
Drive Screw Pitch 20 revolutions/inch
DC Connector 2.1 mm, centre positive
Voltage at DC Connector 12V DC at full load
Amperage 750 mA at full load
Power Supply Type Unregulated linear external wall adapter
Power Supply Output Rating 12V DC @ 800 mA
Dimensions 8 3/4” x 5 3/4” x 4 1/2” High (22.86 cm x 14.605 cm x 11.43 cm)
Weight 3.6 lbs. (1.63 kg)

 Operational

Maximum Speed 3.7742 cm/min
Minimum Speed 0.004205 cm/hr
Maximum Pumping Rate 1,257 mL/hr with a B-D 60 mL syringe
Minimum Pumping Rate 0.73 µL/hr with a B-D 1 mL syringe
Maximum Force 35 lbs. at minimum speed, 18 lbs. at maximum speed
Syringe I.D. Range 0.100 to 50.00 mm

For detailed specifications on the 7xx30 high voltage power supply please go to our dedicated 7xx30 Series page.

Subscribe to our mailing list

Please enter your details below to register for our news and product updates.

* indicates required