Titan HV Power Supply120kV
If you would like to learn more about this product:
Please Contact Us
The Titan HV Power Supply is designed for high speed, high power capacitor charging applications at voltages up to 120kV, 45kJ/sec and PRF's as high as 250Hz.
It uses a rugged IGBT based inverter running in resonant mode to achieve high efficiency and excellent ruggedness.
It is designed to run, either from a high DC voltage input (typically 550V), or from UK/EU3-phase input.
Input
Voltage source | 550VDC or 415VAC three phase mains input |
---|
Output
Average Power | 45000J/sec |
---|---|
Output voltage | 0 to 60kV | 0 to 120kV |
Output current | 1.65A maximum | 0 to 800mA |
Polarity | Positive or negative |
Repetition rate | 250Hz maximum |
Duty cycle | 2 seconds on-load by 2 minutes off-load operation |
Guard band protection | 200us fixed after load discharged |
HV connector | Proprietary connector |
HV cable | Mating cable and connector supplied with PSU. |
Cable length | 3 metres detachable |
Control
Charge enable | Fibre optic input, active light on |
---|---|
Voltage program | Adjusted by 10 turn potentiometer with a DVM reading on front panel. |
Voltage monitor | 0 to 10V represents 0 to 60kV output through BNC connector |
End of charge | Fibre optic output, active light on |
Environment
Operation temperature | 10 to 40°C |
---|---|
Storage temperature | -10 to 60°C |
Humidity | 0-90% (non-condensing) |
Cooling | Forced air |
Mechanical
Height | 9U | 11U |
---|---|
Depth | 560mm (Handles excluded) | 780mm (Handles excluded) |
Width | 19” Rack | 605mm |
Weight | 70kg | 100kg |