- +44 (0) 1746 862555
- [email protected]
- +44 (0) 1746 862555
- [email protected]
The 5040, high voltage capacitor charger has a 1kJ/second charging capacity and is available from 10kV up to 60kV. As a high voltage power supply these modules are capable of producing 2kW power peak output at short intervals, which makes them ideal for charging applications.
The capacitor charger is designed to operate from a wide range of DC input supply, such as a battery pack, but can be made available to work from an AC input supply if required*.
For CW (Continuous Wave) operation, the ripple and stability can be tailored to suit your own specification.
* Please contact Genvolt if you have a specific mains input enquiry.
| Input Voltage | 100 – 140VDC / 20 – 48VDC |
|---|---|
| Output Voltage DC | 10kV to 60kV |
| Output Power | 1kW and 2kW |
| Polarity | Positive or Negative |
| Output Adjustable Range | 0V to 100% Voltage |
| Operating Temperature | 0 to 50°C ambient |
| Cooling Method | Air |
| Control | Remote |
| Monitoring | Remote |
| Weight | Up to 13kg |
| Output Voltage | Model illustrated is 50kV. Higher voltages if required. Both positive and negative polarities are available. |
|---|---|
| Output Current | Peak current is 40mA for the example shown. |
| Duty Cycle | The model above is designed for low duty cycle operation (<10%). Continuous operation with appropriate heatsinking can be provided. |
| Input Voltage | The unit is designed to operate from a DC source such as a battery pack. For 1kJ/sec 2kW pk operation, a 100-140VDC supply is required. (However, for 500J/sec 1kW pk, operation from 20-48V is available). |
| Input Current | Less than 25A maximum, depending on input voltage. (50A for low voltage use) |
| Environment | 0 to 50°C ambient. Non-condensing atmosphere. |
| Weight | Model shown is 13kg |
| Stability, Ripple, etc | The unit is designed for capacitor charging with a maximum PRF of 100Hz. For CW operation, ripple and stability can be tailored to suit the customer’s own specification. |
| Control Interface | Active low HV ON input. 0-10V HV and current limit programming, OC-TTL constant voltage/current outputs, 0-10V HV and current monitor outputs. |
Our expert team can help you with any questions you may have about this product. Complete the form for a call back or call us during office hours.
Genvolt Engineers have also offered customised technical support to hundreds of customers, who represent countless agencies, research departments and global organisations for multiple products across many applications. The people that work with us know they can trust our vision, products and services as we build strong partnerships.
Our vision is to provide customers, of high voltage technologies, with a high level of support and industry-leading expertise so as to deliver the best solution to their requirements.
Complete the form below, and our team will get back to you as soon as possible.
