Titan HV Power Supply120kV

If you would like to learn more about this product: Please Contact Us

The Titan HV Power Supply is designed for high speed, high power capacitor charging applications at voltages up to 120kV, 45kJ/sec and PRF's as high as 250Hz.

It uses a rugged IGBT based inverter running in resonant mode to achieve high efficiency and excellent ruggedness.

It is designed to run, either from a high DC voltage input (typically 550V), or from UK/EU3-phase input.


Voltage source   550VDC or 415VAC three phase mains input


Average Power 45000J/sec
Output voltage 0 to 60kV | 0 to 120kV
Output current 1.65A maximum | 0 to 800mA
Polarity Positive or negative
Repetition rate 250Hz maximum
Duty cycle 2 seconds on-load by 2 minutes off-load operation
Guard band protection 200us fixed after load discharged
HV connector Proprietary connector
HV cable Mating cable and connector supplied with PSU.
Cable length 3 metres detachable


Charge enable Fibre optic input, active light on
Voltage program Adjusted by 10 turn potentiometer with a DVM reading on front panel.
Voltage monitor 0 to 10V represents 0 to 60kV output through BNC connector
End of charge Fibre optic output, active light on


Operation temperature 10 to 40°C
Storage temperature -10 to 60°C
Humidity 0-90% (non-condensing)
Cooling Forced air


Height 9U | 11U
Depth 560mm (Handles excluded) | 780mm (Handles excluded)
Width 19” Rack | 605mm
Weight 70kg | 100kg

Subscribe to our mailing list

Please enter your details below to register for our news and product updates.

* indicates required