Electrospinning Mini Chamber

Key Features

• Compact and portable: Small footprint (microwave-sized) — ideal for labs with limited bench space or for demonstration/teaching use.
• Integrated HV supply options: Pre configured factory options with either the 7000 series or 7000SC Smart Control for simplified setup and safer cable routing.
• Safe internal HV routing: High-voltage connection run internally to the paxolin needle holder — minimises exposed HV cables and improves operator safety.
• Controlled environment: Stable local micro-environment for better process repeatability (reduces impact of drafts/ambient changes).
• Plug & play: Pre-wired, tested and delivered ready for use (requires only mains and grounding connection).
• Flexible: Works with single-needle and small multi-needle jaws/holders (single needle standard).
• Designed for research: Ideal for labs performing electrospinning/electrospraying R&D, teaching demonstrations, formulation screening and method development.

Typical Applications

• Laboratory electrospinning for nanofibre production.
• Electrospraying for particle formation and coating trials.
• Method development and reproducibility studies (drug delivery and particle engineering).
• Teaching, demonstrations and small scale proof-of-concept projects.

Safety and Compliance

• Safety features: Door interlock (HV disable), earth bonding point, resin sealed HV feedthroughs, internal HV cable routing, over-voltage protection through fitted PSU.
• User warnings: Not suitable for untrained operators. Always connect to dedicated earth. Do not operate with door open. Use suitable PPE (insulating gloves) when interacting with HV parts during fault diagnostics (engineer only).
• Standards & conformity: Designed to meet common laboratory safety practices. Supplied with a CE conformity checklist (electrical safety tests performed prior to dispatch). Customers should ensure local compliance (e.g., UK/EU/US) for use in regulated environments.
• Warranty: 12 months from point of delivery (standard terms).
• Materials: Acrylic finish with clear viewing windows; Paxolin needle holder support with stainless steel baseplate.
• Door/access: Front-hinged door with safety interlock (door open → HV disabled).
• Internal mounting: Mounting provisions for standard syringe pump tubing (cable/tube gland) and needle holder positioning brackets (adjustable).
• Collector options: Flat aluminium collector included (250 mm × 250 mm). Rotating collectors are not fitted in this model due to size constraints; contact us for bespoke larger systems.

Electrical Specifcations (Chamber only)

• Primary mains: 100–240 VAC, 47–63 Hz (internal PSU determines exact requirement)
• Power consumption: Depending on the power supply fitted.
• Grounding: Dedicated protective earth terminal provided (must be connected to building earth).
• Safety interlock: Door micro-switch that disables HV when door is opened.
• Internal HV cabling: Factory-installed, shielded high-voltage lead from PSU to needle holder (insulated & resin sealed at chassis feedthrough). Not user serviceable.
• Fused protection: Internal fused circuits for low-voltage/chamber electronics.